PP Melt Blown Filter

SF Standard Melt Blown Filter Zemfons started to manufacture melt-blown PP filter cartridges and paper in 2002, is one of the domestic pioneer manufacturers. We have accumulated rich experiences in fiber manufacturing control technology. MB-PP series have good permeability and high flow rate....

Product Details


SF Standard Melt Blown Filter


Zemfons started to manufacture melt-blown PP filter cartridges and paper in 2002, is one of the domestic pioneer manufacturers. We have accumulated rich experiences in fiber manufacturing control technology. MB-PP series have good permeability and high flow rate.


●Product Features:

◎Effectively filter particles, impurities in the liquid.

◎PP Fibers, no adhesive.

◎2-layer structure of tight inside and loose outside.

◎Unique spinning control technology.

◎Food grade material, no surfactant or adhesive.


●Specifications:

◎Material:PP Fibers

◎Length:5″, 10″, 20″, 30″, 40″,  50″, etc.

◎OD:60、63.5、65、115mm, etc.

◎ID:15、20、24、28、30、53mm, ect.

◎Micron Rating:0.5、1、5、10、25、50、100μ

◎Maximum Operating Differential Pressure:≤40psid@20℃

◎Maximum Operating Temperature:≤80℃

◎End Cap: DOE, 222, 226, Flat, Fin


●Product Applications:

Water treatment, water purifier, PCB plating, photoelectricity, cleaning machine, food and beverage, etc.


●Product Order:

Length + Micron Rating + MB-PP+ OD + ID+ Product Type + End Cap

LP High Viscosity Liquid Melt Blown Filter

LP series are advantaged in big pore diameter, high flow rate and seldom blockage.

LP series are suitable for high viscosity liquid such as printing ink, glues.


●Product Features:

◎Structure of gross fibers and big pore diameter, seldom blockage.

◎High flow rate.

◎2-layer structure of tight inner layer and loose outer layer.                  

◎Suitable for high viscosity liquid.


●Specifications:

◎Material:PP

◎Micron Rating:10µ、25µ、、50µ、75µ、100µ

◎Maximum Operating Temperature:≤90℃

◎Length:125、250、500mm

◎OD:62mm

◎ID:28、30mm

◎Gasket:No gasket---NG With PP gaskets--YG       

 ◎End Cap:Double Open Flat End---S With Gaskets-Y  222 Plug-in---222/F

◎O Ring Material:N=NBR=nitrile butadiene rubber S=SR=Silicone rubber     

B=ordinary rubber E=EPDM P=PTFE=Teflon


●Product Applications:

High viscosity liquid, printing ink; Copperplate resin adhesive, water, paint of chemical industry.


●Product Order:

Length + Micron Rating + LP + End Cap(S,222/F)+ O Ring (N,S,B,E, P)+Gasket(YG, NG)

OP Liquid Deoiling Melt Blown Filter


● Product Material:Polypropylene


● Product Features:

◎Suitable for high viscosity liquid, such as printing ink, glues, paint.   

◎No fiber release.

◎High interception rate ≧99%

◎Seldom blockage, long service life while other ordinary PP melt-blown filter cartridges are very easy to be blocked.


●Specifications:

◎Length:125、250、500mm

◎OD:Ø64mm

◎ID:Ø30mm、Ø28mm

◎Micron Rating:1, 5, 10, 25, 50, 75μm

◎End Cap:Double Open End: DOE          Plug-in: 222/F

◎Maximum Operating Differential Pressure:≤0.6Mpa

◎Maximum Operating Temperature:≤80℃

◎Flow Rate:≥15L/min 

◎Interception Rate: >99%                   


●Product Applications:

High viscosity liquid, such as glues, printing ink, paint, chemical industry, etc.

Other kinds of liquid, such as water, etc.


●Product Order:Length + Micron Rating + OP + End Cap


Inquiry